VIDEOSW Termination Board
The VIDEOSW2 is the second generation to the video switcher VIDEOSW. Both boards accept 4 Video inputs and Transmit either Channel 1 or 2 and either Channel 3 or 4, on 2 video outputs. The amplitude and frequency compensation of cameras with long line drivers is passed through the video switcher. No loss of signal is apparent.
Stock Item. US$170.00
The Board is based on the Maxim 4121 Video Switch Chip. This chip has a bandwidth of 300 MHz. There are 4 comparators to sense the presence of video inputs and light one of 4 LEDs. Each Channel has a designated LED to indicate the presence of a video signal.